Miller MIG/Flux Core Welder, 120V, 90A, Millermatic 141 – MLR 907612

  • Millermatic 141 – 120V input MIG Welder.
  • Max Weld capacity – 3/16″.
  • Amperage Range 30–140 A
  • Net Weight – 51 lb.
  • Dimensions 12.5 in.(H) x 11.25 in.(W) x 20.5 in.(D)

Comes with:

  • 6.5 ft. power cord with plug, M-100 MIG gun and cable assembly, 10 ft. work cable with clamp,
  • Hook-and-loop cord wrapsArgon and AR/CO2 mix flow gauge regulator with gas hose.
  • Two contact tips for .030 in. (0.8 mm) wire
  • Hobart ® spool of .030 in. (0.8 mm) solid wire
  • Material thickness gauge 229895
  • Quick Select ™ drive rolls for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire
Auto-Set ™ operation mode
Auto-Set ™ operation mode

Auto-Set ™ operation mode sets welder to the proper parameters. It’s available for welding 24-gauge through 3/16-inch mild steel, and only  works with .024 and .030 solid wires and C25 shielding gas (75% argon, 25% CO2).

In Manual Mode you can set manually wiring speed (15–360 ipm) and Voltage/Material Thickness (about 8-27V).

Manual operation mode
Manual operation mode
Miller Welder Duty Cycle Chart
Miller Welder, MIG-or-Flux Core Duty Cycle Chart

One thought on “Miller MIG/Flux Core Welder, 120V, 90A, Millermatic 141 – MLR 907612”

Leave a Reply to Dormund Cancel reply

Your email address will not be published. Required fields are marked *